Description
High Performance
32-Bit Processor
Multi Machine Support
Easily configurable multiple Toolheads
4X
Powerful Independant
4 Axes Motor Drivers
Capable of True 2 / 3 / 4 AXES Motion Control
Multiple machine configuration supported: Cartesian, Polar, CoreXY and more...
Simplified Wiring
Easily connect all your machine
components with included
Xtension connectors
Connectivity
Multiple ways to control and execute operations
Free and Easy to use Software Tools are Included
giving you the Control to Unleash Your Creativity!
Product Specifications
Stepper Drivers:
- 4 x High Powered 4.0A (Peak) Stepper Drivers
- Up to 1/32nd Microstepping (Defaulted to 1/8 for higher torque)
- Built in Cooling solution / through airflow design
- Easy current adjustment
- Capable of true 2/3/4 axes motion control
- Rotary
- CoreXY
- Cartesian
- Polar
Outputs:
- Dual configurable onboard Relays for Plasmas, Spindles, etc
- Router (Enable) and VFD Spindle (Direction, Enable, 0-10v) Supported
- PWM Output for Lasers
- Servo Output for Pen Plotters
- Pick and Place solenoid VAC
- Controlled Air Assist
- Up to 24v 5A Switched Output for Coolant or LED devices
Inputs:
- 3x Optocoupled Endstop Inputs with power supply (5/24v). Suitable for passive or active mechanical, optical and inductive switches
- 1x Optocoupled XYZ Probe Input
- Door sensor input
Microcontroller:
- High performance 32 Bit Processor
- USB Interface for Plug and Play
- WIFI Support
- SD Card Support
Connectivity:
- WiFi
- USB
- SD
- Xtension System
- WEB UI
Mechanical:
- Easy V-Slot/C-Beam compatible mounting
- Dimensions: 171mm (Mounting flange included) x 80mm x 36.4mm
Compatibility:
- Supported by OpenBuilds CONTROL software
- Supports OpenBuilds Interface
- Supports GrblHAL Firmware
What is Included:
- BlackBox X32 Fully Assembled
- Xtension Connectors
- Mounting Hardware
- USB Cable
- SD Card
This design or build includes CopperPour, LLC design work(s) shared Open Source under the CC BY-NC-SA 4.0 License Terms and Conditions
High Performance
32-Bit Processor
Multi Machine Support
Easily configurable multiple Toolheads
4X
Powerful Independant 4 Axes Motor Drivers
Capable of True 2 / 3 / 4 AXES Motion Control
Multiple machine configuration supported: Cartesian, Polar, CoreXY and more...
Simplified Wiring
Easily connect all your machine components
with included Xtension connectors
Connectivity
Multiple ways to control and execute operations
Free and Easy to use Software Tools are Included
giving you the Control to Unleash Your Creativity!
Product Specifications
Stepper Drivers:
- 4 x High Powered 4.0A (Peak) Stepper Drivers
- Up to 1/32nd Microstepping (Defaulted to 1/8 for higher torque)
- Built in Cooling solution / through airflow design
- Easy current adjustment
- Capable of true 2/3/4 axes motion control
- Rotary
- CoreXY
- Cartesian
- Polar
Outputs:
- Dual configurable onboard Relays for Plasmas, Spindles, etc
- Router (Enable) and VFD Spindle (Direction, Enable, 0-10v) Supported
- PWM Output for Lasers
- Servo Output for Pen Plotters
- Pick and Place solenoid VAC
- Controlled Air Assist
- Up to 24v 5A Switched Output for Coolant or LED devices
Inputs:
- 3x Optocoupled Endstop Inputs with power supply (5/24v). Suitable for passive or active mechanical, optical and inductive switches
- 1x Optocoupled XYZ Probe Input
- Door sensor input
Microcontroller:
- High performance 32 Bit Processor
- USB Interface for Plug and Play
- WIFI Support
- SD Card Support
Connectivity:
- WiFi
- USB
- SD
- Bluetooth
- Xtension System
- WEB UI
Mechanical:
- Easy V-Slot/C-Beam compatible mounting
- Dimensions: 171mm (Mounting flange included) x 80mm x 36.4mm
Compatibility:
- Supported by OpenBuilds CONTROL software
- Supports OpenBuilds Interface
- Supports GrblHAL Firmware
Whats Included:
Documentation:
This design or build includes OpenBuilds®, LLC design work(s) shared Open Source under the CC BY-SA 4.0 License Terms and Conditions
22 Reviews
-
Controls 2 axis/4 Nema 23 motors
Used this on 3 builds now with a 4th one planned. Oldest one runs every day for my business without failure. Very impressed.
-
BLACKBOX MOTION CONTROL SYSTEM X32
This is my second black box and looking forward to install it once I received it over all I like the simplicity of wiring and setup of the unit
-
black box controller x 32
installed with 2 nema 23 motors started right away..plug and play.
-
Controller change
I switched from the Duet driver on my Ooznest Workbee to this controller for any number of reasons but I couldn't be more pleased with the ease of installation and more importantly the assistance given by the folks at Openbuilds. Could not be more pleased
-
Blackbox 32
the best Grblhal board with the best support! I have tried other boards for grblhal but found them lacking in a number of ways ie connections to the board. bb32 plug system makes it very easy for the beginner in CNC to get started. The software interface also is great for the beginner to get started in setting up your machine.